| Menu |
:Home |
| Request Info |
 |
Poreba North America CNC Flat Bed Lathes
PNA-60 * PNA-70 * PNA-80 Series
| Machine Specifications | Model PNA-60 | Model PNA-70 | Model PNA-80 | |
| Swing over Bed | Inches | 23.4" | 27" | 30" |
| Swing over Cross Slide | Inches | 11" | 14.5" | 13.8" |
| Swing in Gap | Inches | 33.4" | 37" | 40" |
| Distance between Centers |
Inches |
78" / 118" / 156" |
78" / 118" / 156" |
78" / 118" / 156" 200" / 240" |
| Weight Capacity Between Centers (Unsupported) Between Centers (1 Steady) Between Centers (2 Steadies) On Chuck |
lbs. lbs. lbs. lbs. |
4,400 |
4,400 |
6,600 |
| Width of Bed | Inches | 16" | 16" | 22.5" |
| Spindle Nose | Camlock | D1-8 | D1-8 | D1-11 |
| Spindle Bore |
Inches |
3.2" (4.1" Optional) |
3.2" (4.1" Optional) |
6" |
| Spindle Speeds | RPM | 80 - 2,100 | 80 - 2,100 | 15 - 1,480 |
| Rapid Traverse Rate - Z axis | IPM | 590" | 590" | 475" |
| Rapid Traverse Rate - X axis | IPM | 590" | 590" | 400" |
| Main Motor (220 Volt) | HP | 15/20 | 15/20 | 20/30 |
| Tailstock Quill Diameter | 3.1" | 3.1" | 4.9" | |
| Tailstock Quill Travel | 5.9" | 5.9" | 9.1" | |
| Automatic Lubrication | Standard | Standard | Standard | |
| Repeatability | Inches | .0001 | .0001 | .0001 |
| Machine Weight |
lbs . |
8.580 / 9680 10,780 |
11,300 / 14,190
17,160 |
15.400 / 18,040 20,680 23,320 / 25,960 |
| Tool Configuration |
Manual Quick Change Tool Post
-Standard |
|||
| CNC Control |
Fanuc 0iTC with Manual Guide i (Conversational - Teach-in) |
|||
Options:
Live Tooling
C-Axis
Chucks
Assorted Turrets
Steady Rests
| Poreba is a registered trademark of Poreba North America LLC © Copyright 2007. All Rights Reserved. |